Blogs » Other » Protective Maintenance Of Sealed 12v Battery Is Essential

Protective Maintenance Of Sealed 12v Battery Is Essential

  •   Over time, even the Sealed 12v Battery will lose power, depending on temperature and storage conditions. At 80 degrees Fahrenheit, lead-acid batteries lose 4% of their power every week. A 125 amp per hour battery will lose 80 amps in four months, so keeping it charged is essential to protect the power source.

      Regularly clean cables and connectors with a hard steel brush to eliminate corrosion and optimize electrical connections.

      You can scrape the inside of the connector with a knife to strip the soft wire to expose the bright metal.

      When handling the battery, always wear safety glasses and protective gloves.

      Small particles may be dispersed into the air, and too many storage tanks may cause explosive emissions.

      A thin layer of protective lubricant is applied to the battery terminals to limit further battery corrosion.

      Benefits of using a professional watering system

      Battery safety and performance issues can affect manufacturers and consultants. It is recommended not to try to fill sealed batteries, but many people do this to reduce costs and extend battery life. The most common problem with refilling SLA batteries is adding too much water, which may cause explosive ejection of toxic chemicals from the battery. Consider using a hydrometer tester and a special battery watering system to prevent filling up.

      You must break the lid seal of the sealed battery to test and refill the water storage tank.

      Some SLA batteries use gel, so you cannot refill these types of batteries.

      After breaking the seal, you can remove the lid and enter the water tank.

      Different watering systems help prevent overfilling that can lead to explosive discharge.

      After refilling the SLA batteries, they should be charged.

      Use super glue to glue the lid in place.

      When handling batteries, be sure to use distilled water, and wear gloves and safety glasses.

      Lead-acid battery technology has been proven to be safe and reliable after more than 150 years of practice. While meeting critical energy needs, these batteries are less than 1.0% of the lead emissions in the United States. Sealed batteries provide many advantages for operating equipment, including being able to use them in any location and reducing the risk of spilling and discharging when operating mobile equipment.

      SLA batteries can provide reliable power, less risk, and minimal maintenance procedures. However, thoughtful maintenance, storage, and charging can ensure safer operation, reliable power storage, and rechargeable energy, thereby balancing the needs of technology and the environment.