Introduction To Kibbeh Machine Maintenance

  •    Many times we choose Kibbeh for breakfast. In fact, many shops sell well because there are many machines to choose from, so that we can guarantee the timely steaming of various Kibbeh, that is, Kibbeh Machine. Since such machines exist in the market, we can still look at how to do daily maintenance work, whether it is safety or the overall cleanliness, all need to be analyzed. Encrusting Machine Manufacturer will conduct a specific analysis in this regard.



    1. After using the machine in each shift, it should be cleaned in time to ensure the cleanliness of Kibbeh. Before use, it is still necessary to check whether the machine is operating normally, or it is in the process of feeding or disassembling some blades. It should be operated correctly. Do not hit, smash, or use prying. These improper operations will damage the normal use of the machine.


      Second, the bearings of the Kibbeh Machine need to be disassembled and washed once every six months. If there is a problem, they need to be replaced in time, so as to ensure the production and operation. After cleaning the blade, you still need to look at the specific placement position. As long as the placement position is reasonable, there will be no bad effects. Daily routine maintenance is also very important. You can also follow the instructions for deceleration or other operations. To proceed.


    The above two aspects are relatively clear daily maintenance work. When we pay attention to Kibbeh Machine, we need to analyze and understand from these aspects, so that the normal operation of the machine can be guaranteed. To a large extent, we can also know the actual advantages. , The machine can be used better; the service life can be extended while the normal operation is ensured, and naturally it can be used longer.

20 views