Always check that the injection molding machine is installed and operating at the temperature specified on the recording paper. this is very important. Because temperature affects the surface finish and yield of the Chair Mould(FURNITUREMOULD) ... moreAlways check that the injection molding machine is installed and operating at the temperature specified on the recording paper. this is very important. Because temperature affects the surface finish and yield of the Chair Mould(FURNITUREMOULD) https://www.furnituremould.com/product/chair-table-stool-mould/
. All measurements must be recorded and the injection molding machine checked at the specified time.
The injection molded parts must be evenly cooled, that is, different parts of the chair mould must be cooled at different rates so that the entire product is evenly cooled. Injection molded parts must be cooled quickly, while ensuring that defects do not occur, such as uneven surfaces and changes in physical properties.
The cooling rate of each portion of the injection molded part must be equal, but this means that the chair mould is cooled by a non-uniform method, for example, cold water is fed into the inner core portion of the mold, and the outer mold is cooled with warm water. This technique... less
