1. To achieve the end of filling, the plastic requires a total pressure of 2200 psi.
2. In order to reach the middle part of the product, the plastic requires a total pressure of 2200 psi.
Based on the above two points, the process is limited by pressure.
The plastic requires a pressure of 1379-983 = 396 psi to reach the end of the third splitter from the end of the secondary splitter. In order to flow through the gate, the plastic requires a pressure of 1897-1379 = 518 psi.
Therefore, the three-stage flow passage and the gate seem to have a relatively large pressure drop, so the three-stage flow passage and the gate should be enlarged. This will reduce the final pressure at the end of the fill to 1901 psi. This process is no longer limited by pressure. Ensuring adequate injection pressure helps achieve consistent mold filling. Pressure... less
