Air Cooler Mould(FURNITUREMOULD) https://www.furnituremould.com/
inevitably goes wrong during thousands of uses. The problem is that the number of air cooler mould maintenance should be as short as possible, which can greatly reduce maintenance costs... moreAir Cooler Mould(FURNITUREMOULD) https://www.furnituremould.com/
inevitably goes wrong during thousands of uses. The problem is that the number of air cooler mould maintenance should be as short as possible, which can greatly reduce maintenance costs and increase production efficiency.
Ideally, the air cooler mould does not need to be replaced in the production cycle except for the vulnerable parts of the spring top strap. But in fact the general air cooler mould has been repaired and repaired, even a batch of air cooler mould will be repaired two to three times a month.
It can be seen that the air cooler mould repair is actually the reason for the mould itself. Here's how to reduce air cooler mould maintenance:
1. Strengthen scientific injection moulding knowledge training, try not to hurt the mould in production. Low-pressure protection settings, clamping speed, clamping force, injection speed, holding pressure, mould temperature and other parameters will cause great damage to the air cooler... less
