Groups » My State » Daily Necessities Mould Can Be Divided According
Group Info
Daily Necessities Mould Can Be Divided According My State
1. Gate mould: The gate mould is the gate and the gate on the parting line. The cavity is released together with the product. The design is the simplest, the processing is convenient, and the cost is low. Therefore, many people use the gate mould. The... more1. Gate mould: The gate mould is the gate and the gate on the parting line. The cavity is released together with the product. The design is the simplest, the processing is convenient, and the cost is low. Therefore, many people use the gate mould. The Daily Necessities Mould(FURNITUREMOULD) https://www.furnituremould.com/product/daily-necessities-mould/
structure is divided into two parts: dynamic and determined. Since the movable part of the injection moulding machine is in the moving mode (mainly the injection side), the injection end of the injection moulding machine is usually called a fixed mode. Since the mould part of the spout is usually composed of two steel plates, it is also called "two plates". The simplest structure in a large nozzle mould is two plates.
2. Fine flow path moulds, runners and gates are not on the parting line, generally directly on the product, so it is necessary to design a set of nozzle parting lines, the design is more complicated, the processing is more difficult,... less
