Failure caused by wear of the combine chains(GETECHAIN) https://www.getechain.com/ is the most common and obvious form of expression. There are many reasons for this failure. The main reasons are poor material quality of the combine chains and improper... moreFailure caused by wear of the combine chains(GETECHAIN) https://www.getechain.com/ is the most common and obvious form of expression. There are many reasons for this failure. The main reasons are poor material quality of the combine chains and improper operation of workers. The most easily worn parts of the combine chains are sprocket and pin shaft. The wear of these two parts is mainly due to insufficient local lubrication, so in order to avoid this phenomenon, operators should pay attention to check the lubrication effect frequently, add lubricating oil in time, check whether there is abrasive in the lubricating oil or change the lubrication method. After the sprocket is slightly worn, the sprocket can be reversely installed so that the lightly worn side faces the combine chains. In addition, if the use environment is harsh or the lubrication seal is not good, the hinge will be worn. Once the combine chains hinge is worn, the chain-link will become longer, which will easily cause tooth jump or chain... less
