As a metal material, copper clad aluminum is a material to be used in the industrial field, especially the cable raw material. Copper clad aluminum is more reliable than pure copper. Why is Copper Clad Aluminum Winding Wire(XINYU) ...  moreAs a metal material, copper clad aluminum is a material to be used in the industrial field, especially the cable raw material. Copper clad aluminum is more reliable than pure copper. Why is Copper Clad Aluminum Winding Wire(XINYU) http://www.xinyu-enameledwire.com/product/enameled-rectangular-copperaluminum-wire/
more popular than pure copper products?

First, the use of pure copper reduces the production cost. The length ratio of copper wires of wires with the same composition and diameter is 2.6:1, thus greatly saving the use of pure copper. For example, the copper price of 10×100 copper is 50,000, and a copper watch is quoted at 476 yuan, while using the same standard copper-clad aluminum, the cost of a 10×100 meter copper-clad aluminum piece is 223 yuan, saving material cost. The second is that the measured value and the standard copper load capacity reach more than 85%, and other physical data are close to pure copper, which is very convenient in practice. Third, because the surface of...    less

1. Distinguish the quality of leaf chain(GETECHAIN) https://www.getechain.com/product/leaf-chain-product/
from its appearance

The first is to see if the blade of the leaf chain is deformed, and there are cracks, rust, and other problems. In addition,...  more1. Distinguish the quality of leaf chain(GETECHAIN) https://www.getechain.com/product/leaf-chain-product/
from its appearance

The first is to see if the blade of the leaf chain is deformed, and there are cracks, rust, and other problems. In addition, there are whether the pins, rollers and joint number parts are normal, whether there is loose deformation, wear and tear, and whether the leaf chain will not make other sounds or abnormal vibration when in use, and to ensure that the leaf chain has good smoothness.

2. Accurately measure the length of the leaf chain

Before measurement, the leaf chain to be measured should be cleared and cleaned first, and then the leaf chain to be measured should be wrapped around the two sprockets so that it can have better support. During the measurement, a certain load should be borne on the leaf chain. The leaf chain can have good tension. When the leaf chain is used in the sprocket, it should ensure good tooth cooperation and measure the center distance between...    less

Chair Mould(FURNITUREMOULD) https://www.furnituremould.com/product/chair-table-stool-mould/
meeting working conditions

1. Wear resistance

When the blank plastically degrades in the mould cavity, it flows and slides along the surface of the...  moreChair Mould(FURNITUREMOULD) https://www.furnituremould.com/product/chair-table-stool-mould/
meeting working conditions

1. Wear resistance

When the blank plastically degrades in the mould cavity, it flows and slides along the surface of the mould cavity, resulting in severe friction between the surface of the mould cavity and the blank, causing the chair mould to fail due to wear. Therefore, the wear resistance of materials is one of the most basic and important properties of chair mould.

Hardness is the main factor affecting wear resistance. Under normal circumstances, the higher the hardness of the chair mould parts, the smaller the wear amount and the better the wear resistance. In addition, wear resistance is also related to the type, quantity, morphology, size and distribution of carbides in the material.

2. Toughness

Most of the working conditions of the chair mould are very harsh. Some often bear large impact loads, leading to brittle fracture. In order to prevent the chair mould parts...    less

China chain factory(GETECHAIN) https://www.getechain.com/
has certain performance requirements for the bearing roller conveyor chain when it is used. If it cannot be reached, it will not only cause damage to the chain itself but also affect the travel...  moreChina chain factory(GETECHAIN) https://www.getechain.com/
has certain performance requirements for the bearing roller conveyor chain when it is used. If it cannot be reached, it will not only cause damage to the chain itself but also affect the travel efficiency of the whole work, as follows:

1. The inner link consists of an inner link plate and a sleeve, and the inner link plate and the sleeve are in interference fit connection; The sleeve and the roller are in clearance fit, and the roller can freely move around the sleeve.

2. Excessive clearance and large impact. The gap is too small, it is easy to die, dust accumulation. The outer link consists of an outer link plate and a pin shaft, which are connected together by an interference fit.

3. The inner link and the outer link are connected with a sleeve and a pin shaft in a clearance fit to form a living hinge. When the chain is bent, the sleeve can move freely around the pin shaft, acting as a hinge.

4. Mark fit dimension tolerance and important...    less

Hello everyone this my Group also welcome everyone this part of public bz आपके सबके लिए विशेष जानकारी सभी के लिए जरूरी हैं और स्वास्थ्य Health के...  moreHello everyone this my Group also welcome everyone this part of public bz आपके सबके लिए विशेष जानकारी सभी के लिए जरूरी हैं और स्वास्थ्य Health के सभी के लिए जरूरी हैं में gracy कुछ ऐसे प्रोडक्ट के माध्य्म से आप लोगों के लिए इस ग्रुप को create किया सब तक मेरा संदेश जाए।
अपने हेल्थ को इन प्रोडक्ट को use kre aur apne aap ko fit rakhe agar koi insaan kisi problem meh woh bhi puch sakte hain
Gracy 7217837360 Nutrition Advisor  

How to expand the variety as soon as possible, overcome technical difficulties, improve the quality of economic growth, and enter the chain drive "production strong country" track is worthy of in-depth exploration and research. This paper discusses the...  moreHow to expand the variety as soon as possible, overcome technical difficulties, improve the quality of economic growth, and enter the chain drive "production strong country" track is worthy of in-depth exploration and research. This paper discusses the development prospects of chain transmission products from a technical perspective and provides a reference for China chain supplier(GETECHAIN) https://www.getechain.com/
.

In recent years, a lot of experimental research work has been done on the fatigue performance of chains at home and abroad, which has undoubtedly played an important role in guiding product design and manufacture.

At the same time, the research on the distribution of fatigue life of chain is also noted, but limited to many reasons, these research work is not deep enough and the system, and the analysis of fatigue fracture, especially the microscopic analysis of fatigue fracture is far from enough, for fatigue The mechanism of crack initiation, microcrack propagation, macroscopic...    less

Sacred Heart Dental Clinic is a Filipino Dentists clinic that promises to provide affordable dental services performed by credible Manila dentists and unbeatable Manila dental tourism packages. We are the best dental clinic in the Philippines.

o

The availability of commercial grade high flow Water Filter Spare Parts(KOKOELECTRIC) https://www.kokoelectric.com/
and enclosure systems provides manufacturers in all industries with superior advantages, especially RO prefiltration, or filtration of...  moreThe availability of commercial grade high flow Water Filter Spare Parts(KOKOELECTRIC) https://www.kokoelectric.com/
and enclosure systems provides manufacturers in all industries with superior advantages, especially RO prefiltration, or filtration of water and wastewater. These large pleated filters offer better performance, have a large filtration area, reduce the cost (and frequency) of replacing filters, and reduce environmental impact, making them the preferred filtration option.

High flow water filter spare parts enable finer filtration and are suitable for highly corrosive fluids such as sea water or chemicals. The cartridges are mounted in a larger, one-coated, carbon or stainless steel single-shell with a smooth interior that facilitates different types of coatings. This means that water filters can now meet a wider range of manufacturing needs, including filtration of high-salt liquids, certain chemicals, petrochemicals, plating solutions, pharmaceuticals, and more. It also facilitates the...    less

Dosto aap ko ise Group me har prkar ki information mil jayegi. aap is group ko badhane me support kare. Or adhik se adhik Member Add kare.
Thanks

Dark spots appear not only at the opening of the Chair Mould(FURNITUREMOULD) https://www.furnituremould.com/product/chair-table-stool-mould/
, but also often after the sharp corners of the article are formed. For example, the sharp corner surface of an...  moreDark spots appear not only at the opening of the Chair Mould(FURNITUREMOULD) https://www.furnituremould.com/product/chair-table-stool-mould/
, but also often after the sharp corners of the article are formed. For example, the sharp corner surface of an item is usually very smooth, but very gray and rough behind it. This is also due to the excessive flow rate and injection speed that cause the cooling surface layer to be replaced by internal fluid displacement.

It is recommended to use the gradual injection again and gradually increase the injection speed. The best way is to let the melt start to increase speed after passing the sharp edge.

In areas far from the gate, sharp changes in product angle can also cause such defects. Therefore, a smoother fillet transition is used in these areas when designing the product.

For injection molded articles, the difference in gloss is most pronounced on the surface of the textured article. Even if the mold surface is very uniform, irregular gloss may appear on...    less

रक्तदान महादान करके देखो अच्छा लगता है सभी मेंबर अपना ब्लेड ग्रुप लिखे