Air tools are generally relatively small, the advantage is that they are easy to use, not suitable for wear, and more importantly, they save money. The service life of air tools is very long, but if the use and maintenance methods are not correct, you will find that your air tools often have one or another problem. In this situation, many people complain about this and that, but it is strange that very few people complain that even if they are bad, in order not to complain about air tools, they should learn air tools maintenance knowledge correctly.
Air supply for air tools: Use 90PSI (6.2Bar) clean and dry air to supply tools. Excessive air pressure will quickly reduce the life of the tool. Connect the tools with the appropriate size parts, pipes and hoses marked in the tool chart. If you use an air pressure regulator, set the air pressure to an output pressure of 0.62MPA. Air tools use specific steps to connect air tools to the air production line. Set the air pressure.
The air production line must be equipped with an air lubricating oil device. If the air lubricating device is unqualified or not, the following daily maintenance should be carried out for the tool: After working continuously for 3 to 4 hours, separate the tool from the air source and drip from the tool air inlet. Pour 7-8 drops of high-purity light engine oil with low viscosity, connect the air pipe, open the air source, and blow the oil into the cylinder. For qualified users and the working intensity is relatively full, it is recommended to install a small oiler at the intake joint. Usually 30-40 days, the air compressor and oil-water separator need to be regularly drained and maintained to remove impurities to ensure that the air entering the tool is clean and dry.
The advantages of air tools: easy access to air, low working pressure, used air can be discharged locally, no need to recycle pipes; air viscosity is small, flow resistance loss is small, convenient for centralized air supply and long-distance transportation; pneumatic actuators The movement speed is high; the pneumatic system has strong adaptability to the environment, and can work reliably in a wide temperature range, humid and dusty environment, a slight leakage will not pollute the environment, no fire and explosion hazard, safe use; simple structure and maintenance Convenient and low cost; Pneumatic components have a long service life; Pneumatic components have a smaller executive output than hydraulics, faster movement, and strong adaptability. They can work in harsh, explosive, heavy, humid, and impact environments without polluting the environment , Long working life, simple structure, easy maintenance, low price.
The composition of the air tools series: air pressure generating device; air compressor; pneumatic actuator; pneumatic control element _ used to control the pressure, flow and flow mode of the working medium to enable the actuator to complete the required motion rules, such as pressure, flow and Directional control valves and various logic elements, etc.; sensing elements and conversion elements detect controlled parameters and turn them into air pressure signal qigong sensing elements and elements that convert air signals and electro-hydraulic signals to each other; pneumatic accessories include Air source purification, component lubrication, component connection and noise reduction components.
For details, please contact: https://www.luxitools.com/
