Power Tools Die Casting Part Factory introduces the method of removing burrs from aluminum alloy die-casting:
1. The method of removing burrs is manual removal. This is a relatively traditional method of processing Jiangxi aluminum alloy die castings. It has low efficiency and high cost. It mainly uses sandpaper, files, belt machines, grinding heads, and other tools, but it is only suitable for smaller ones. The burr processing.
2. Die deburring is also a relatively common method. Using a punching die and a punching machine to remove burrs on aluminum alloy die castings. This method requires a certain amount of die production costs, and even a plastic mold is required. It is more suitable for simple shapes Die-casting parts, deburring efficiency and effect are better than manual.
3. Grinding and deburring is also a common removal method, mainly including vibration, sandblasting and rollers, etc., which are currently used by die casting manufacturers. However, grinding and deburring have the problem of unclean removal, and subsequent manual processing or other methods are required to remove burrs. Generally speaking, this method is suitable for processing to die casting products in larger batches.
Through the above introduction, Power Generating Tools Factory hopes that you can simply refer to the content of this article in future use.
