Solenoid Valve is industrial equipment controlled by electromagnetic. It is an automation basic component used to control fluid. It is an actuator and is not limited to hydraulic and pneumatic. Used in industrial control systems to adjust the direction, flow, speed and other parameters of the medium. The solenoid valve can cooperate with different circuits to achieve the desired control, and the accuracy and flexibility of the control can be guaranteed. There are many kinds of solenoid valves. Different solenoid valves play a role in different positions of the control system. The most commonly used ones are check valves, safety valves, directional control valves, speed control valves, etc.
There is a closed cavity in the solenoid valve with through holes at different positions. Each hole is connected to a different oil pipe. In the middle of the cavity is a piston. There are two electromagnets on both sides. Which side of the magnet coil will be attracted to the valve body when it is energized. On the other hand, by controlling the movement of the valve body to open or close the different oil discharge holes, and the oil inlet is normally open, the hydraulic oil will enter the different oil discharge pipes, and then the piston of the cylinder is pushed by the oil pressure. Drive the piston rod, and the piston rod drives the mechanical device. In this way, the mechanical movement is controlled by controlling the current on and off of the electromagnet.
The selection of solenoid valve should first follow the four principles of safety, reliability, applicability, and economy in order, and then according to the six aspects of on-site working conditions (ie pipeline parameters, fluid parameters, pressure parameters, electrical parameters, action methods, Special requirements for selection).
Yuyao Xinsheng Solenoid Valve Co., Ltd. is a Solenoid Valve Manufacturer and Water Rotameter and other products. Welcome to visit our official website.
