Hose Fittings And Adapters Factory introduces the five details of selecting stainless steel metal hoses
1. The correct length dimension and nominal diameter, choose the joint type (mainly flange connection, thread connection, quick joint connection), the size of the metal hose, and the length of the hose.
2. Pressure range, according to the actual working pressure of the hose, and then query the nominal diameter and pressure gauge of the corrugated metal hose.
3. The transmission medium, the chemical properties of the medium conveyed in the hose, and the corrosion resistance of the hose material determine the material of the hose and each part.
4. Liquid temperature, working temperature and range of the medium in the hose, and working environment temperature. When the temperature is high, the pressure after temperature correction must be determined according to the temperature correction coefficient of the working pressure of the metal hose at high temperature to determine the correct pressure level.
5. The state of the hose, according to the state of the hose when it is used, refer to the correct use and installation method of the metal hose and the optimal length of the hose during settlement compensation. The length calculation of the hose in various motion states, the number of small bending times and the small bending radius of the hose and other factors, the correct selection of the length of the hose and the correct installation of the parameters.
Through the above introduction, Wholesale Hose Fittings Manufacturers hopes that you can simply refer to the content of this article in future use.
