Blogs » Other » Bite Type Tube Fittings Manufacturers Introduces The Classifica

Bite Type Tube Fittings Manufacturers Introduces The Classifica


    Bite Type Tube Fittings Manufacturers introduces metal hose products including oil suction hose, steam hose, sandblasting hose, acid and alkali suction hose, food hose, oxygen blowing hose and various special-shaped hoses. Widely used in machinery, chemical, petroleum, metallurgy, food and other industries.

    What is the pressure range of the pressure-resistant metal hose: the pressure range of the hose is generally PN0.6-32.0Mpa. Up to 42.0MPa. The metal hose is the main pressure-bearing part of the hose installed in the pressure pipeline, and at the same time acts as a sheath for the bellows. According to the pressure in the pipeline and the application site, one or more layers of stainless steel wire or steel belt can be selected. Weaving.

    Features: Corrosion resistance, high temperature resistance (about 200 ℃, > 260 ℃ will affect the service life), low temperature resistance, light weight, small size, good flexibility.

    Corrugated metal hose (abbreviated as corrugated pipe) is a flexible pipe in modern industrial pipelines. It is mainly composed of bellows, mesh sleeves and joints. Its inner tube is a thin-walled stainless steel corrugated tube with a spiral or annular waveform, and the mesh sleeve on the outer layer of the corrugated tube is woven from stainless steel wire or steel strip according to certain parameters. The fittings or flanges at both ends of the hose are matched to the fittings or flanges of the customer's pipeline.

    The corrugated metal hose is generally composed of three parts: corrugated pipe, mesh sleeve and joint. The corrugated pipe is the body of the metal hose and plays a flexible role; the mesh sleeve plays the role of strengthening and shielding; the joint plays the role of connection. For different use requirements, the way they are connected to each other is different: the three parts of the bellows, the mesh sleeve and the joint are connected by welding, which is called welding type; connected by mechanical clamping, called mechanical clamping type; In addition, there is a combination of the above two methods, called hybrid.

    Through the above introduction, BSP Thread Fittings Manufacturers hopes that you can simply refer to the content of this article in future use.