Many friends who have installed household water purifiers have discovered that there are many filter elements in household water purifiers, and some high-end water purifiers will be marked with Ro System Component(KOKOELECTRIC) ... moreMany friends who have installed household water purifiers have discovered that there are many filter elements in household water purifiers, and some high-end water purifiers will be marked with Ro System Component(KOKOELECTRIC) https://www.kokoelectric.com/product/ro-system-component/
. So what is this RO membrane? What is the role of the RO membrane?
RO is the abbreviation of Reverse Osmosis in English, which means reverse osmosis in Chinese. In general, the movement of water moving molecules is from low concentration to high concentration. Once pressurized, water will flow from high concentration to low concentration, which is the so-called reverse osmosis principle.
As the pore diameter of RO membrane is one million times that of hair filaments, i.e. 0.0001 micron, which is generally invisible to naked eyes, and the size of bacteria and viruses is 5000 times that of RO membrane, only water molecules, and some mineral ions can pass through, and other impurities and heavy metals are discharged from... less
Meesho Supply Provides Proper Customer Satisfaction.
Respectable Marginal Income and hassel free replacement.
Use link to Join Meesho with Online & COD Payment facility.
Get 30 % Discount on your First... moreMeesho Supply Provides Proper Customer Satisfaction.
Respectable Marginal Income and hassel free replacement.
Use link to Join Meesho with Online & COD Payment facility.
Get 30 % Discount on your First Order.
After injection moulding a plastic part, the plastic part is ejected from the cavity, whether it is a single or multiple parts of the ejection mechanism, and the ejection work is generally done in one shot. However, sometimes due to the special shape of... moreAfter injection moulding a plastic part, the plastic part is ejected from the cavity, whether it is a single or multiple parts of the ejection mechanism, and the ejection work is generally done in one shot. However, sometimes due to the special shape of the plastic part or the automation required in production, the plastic part is still difficult to remove from the cavity or does not fall off automatically after the demolding work is completed. At this time, it is necessary to add another demolding action to peel off the plastic part. The difficulty of demolding is mainly due to the extrusion of gates or plastic parts in the Household Product Mould(FURNITUREMOULD) https://www.furnituremould.com/product/daily-necessities-mould/
. The reasons are:
1. Insufficient production.
2. Household product mould
(1) Demoulding structure or improper position.
(2) The draft is insufficient.
(3) Household products have high mould temperature or poor ventilation.
(4) The rough surface of the runner wall or... less
Air Cooler Mould(FURNITUREMOULD) https://www.furnituremould.com/
operation points: mould transportation, mould assembly, mould cooling water hose connection, oil pipe and limit switch connection confirmation, moulding work, processing and filtration,... moreAir Cooler Mould(FURNITUREMOULD) https://www.furnituremould.com/
operation points: mould transportation, mould assembly, mould cooling water hose connection, oil pipe and limit switch connection confirmation, moulding work, processing and filtration, recycling materials use, finished mould inspection points.
Ring selection
1. Confirm the specifications of the eye bolts. Check the eyebolt hole of the eyebolt: metric or imperial, select the matching eyebolt before installation.
2. Check the eyebolt for damage, cracking, and deformation.
3. Confirm that the wire rope is rust-free, has no obvious deformation, and has no broken wire. Check the lock plate for A and B plates. The lock plate should be used under mould transport.
Twisting mould
1. Rubber or wood is used as a mat to prevent collision and damage of the air cooler mould.
2. Check the condition before the display and check for possible collisions of the mould parts, such as water plugs, springs, bolts, etc. If there is a risk, remove it... less
