Tenter finishing refers to the widening of fabrics with certain moisture content and strong hygroscopic chemical fibers to a prescribed size on a
[u]Hot Air Stenter[/u], and heating and drying at the same time to eliminate some internal stress and coordinate warp and weft yarns State, make the fabric width uniform and relatively stable, and improve the process of weft and slope.
The edge control of the hot air stenter adopts infrared edge detection controller; the transmission system adopts AC frequency conversion speed regulation; the upper and lower super feed, brush wheel, and cloth output adopt synchronous motor and the main drive frequency conversion special motor synchronous operation; control system It adopts all-digital type, and the inverter, PLC, touch screen and display are integrated by communication methods. The circulating fan of the hot air tenter uses AC frequency conversion to adjust the speed, and the motor is directly connected to the fan; the temperature of each section of the drying room is automatically controlled separately; the air pipe adopts a punching nozzle type, and the ratio of the upper and lower air speeds can be adjusted.
Zhejiang Licheng Printing and Dyeing Equipment Co., Ltd. specializes in the production of various types of printing and dyeing machinery such as hot air hot air stenter, softener, mercerizing machine, rotary screen printing machine, roll dyeing machine,
[u]Open Type Rotary Screen Printer[/u] and so on. In recent years, on the basis of ensuring the high efficiency of the original products, the company has further improved the energy saving and environmental protection of the products, thereby maximizing the use value of the products to customers.
