Primary Differences Between Woven and Welded Wire Mesh
While there are many characteristics to consider when selecting the right Wire Mesh product for your project, one of the primary differences between woven and welded Wire Mesh is how they are constructed, or how the wires intersect. Woven Mesh is formed when cross wires and line wires are crossed over and under each other. In order for Wire Mesh to be considered welded, wire intersections must be connected through a melting and cooling process. Nevertheless, the differences and capabilities of these two categories of Mesh go far beyond their methods of construction.To get more news about
galvanized steel wire mesh, you can visit resenwiremesh.com official website.
Because the bonds of welded Mesh are fused together, they are able to provide a certain level of rigidity and strength, maintaining their fixed opening shape even under force. It should be noted, however, that if outside pressures put too much stress on welded Wire Mesh intersections, a “breaking point” exists where welded bonds can eventually snap.
Because woven Mesh has no fixed bonds, the product is pliable and does not possess the rigid qualities of its welded counterpart. However, because they are formed without welded bonds, the flexibility of woven items allows the product to yield under outside pressure before springing back. These characteristics provide a unique durability that is useful in applications where stress applied to Wire Mesh is an important consideration.
It is likely that when deciding which construction type is right for you, the desired opening size (clear space between wires, measured from the inside edge of one wire to the inside edge of the next adjacent wire) will be an important factor. Generally, woven items are available with smaller opening sizes, while welded is better suited for applications that call for larger openings.
For welded, the smaller the desired opening size, the smaller the wire diameter has to be in order to leave enough clear opening for the welding process to occur between the wires. However, if the wire diameter (often referred to as wire gauge) becomes too small, the heat generated from the welding process can melt the wires. For these reasons, the smallest opening size offered for welded is typically 4 x 4 Mesh (four openings per lineal inch measured from the center of the wires), although there are a few smaller Mesh sizes available in Stainless Steel and PVC coated finishes.
It is important to note that woven is often unavailable in some of the larger opening sizes common in welded items. Without welded bonds to hold them in place, woven wires in larger opening sizes can shift and lose their original shape. If you need a larger opening size but still require a woven construction, lockcrimp and intercrimp weave types provide increased rigidity.
