-
1. Accuracy of module heat export
The Air Cooler Mould(FURNITUREMOULD) https://www.furnituremould.com/ is a heat exchanger. Most of the energy (heat) obtained by the plastic in the injection machine to melt and be suitable for injection must be... more1. Accuracy of module heat export
The Air Cooler Mould(FURNITUREMOULD) https://www.furnituremould.com/ is a heat exchanger. Most of the energy (heat) obtained by the plastic in the injection machine to melt and be suitable for injection must be dissipated before the mould is opened to eject the plastic product, and the plastic product must be hardened to meet the ejection requirements. The cooling time of products generally accounts for 70% to 80% of the whole moulding cycle. Therefore, the key to a good mould is the quality and efficiency of the cooling settings in its modules and templates, which is actually the amount of heat it can export per second, and cannot be made too complicated and expensive.
2. Good performance of mould filling and exhaust
The discharge of air from the mould cavity during mould filling is accompanied by the appearance of casting moulding, and the importance of exhaust has been recognized. For the air cooler mould designer, sufficient exhaust gas will be taken into... less
led by
xiu umin
-
-
In most cases, many companies ignore the importance of lubrication of the leaf chain(GETECHAIN) https://www.getechain.com/product/leaf-chain/ . Therefore, the service life of the leaf chain is shortened and the frequency of replacing the whole set of... moreIn most cases, many companies ignore the importance of lubrication of the leaf chain(GETECHAIN) https://www.getechain.com/product/leaf-chain/ . Therefore, the service life of the leaf chain is shortened and the frequency of replacing the whole set of chains is increased, thus increasing the maintenance cost. At present, most chains are adhered to the chain surface by high viscosity lubricating oil or grease. Although it can lubricate the chain teeth and chain surfaces, it can hardly penetrate into the chain pins, bushings and rollers. Most leaf chain failures are caused by the following factors:
1. When the inside of the leaf chain is not sufficiently lubricated, wear and corrosion will occur and the chain will become loose or kinked.
2. When the leaf chain runs at high speed, the centrifugal force will drop the lubricant attached to the surface, which cannot play the role of lubricating and protecting the leaf chain.
3. When the leaf chain is operated in a dusty and humid environment, dust and... less
led by
minseok kim
-
The rate of dangerous diseases is increasing day after day in the current world. So it is significant to take health insurance service and live a secured and healthy life. You can conveniently treat your disease and get a healthy life with the assistance... moreThe rate of dangerous diseases is increasing day after day in the current world. So it is significant to take health insurance service and live a secured and healthy life. You can conveniently treat your disease and get a healthy life with the assistance of health insurance service.
led by
Reeloug eelough
-
Bonded fabric(WANSHIYITEX) https://www.wanshiyitex.com/product/bonded-fabric/ is made of superfine fiber through special textile processing and unique dyeing finishing, and then processed by "bonded" equipment. The bonded fabric uses high technology and... moreBonded fabric(WANSHIYITEX) https://www.wanshiyitex.com/product/bonded-fabric/ is made of superfine fiber through special textile processing and unique dyeing finishing, and then processed by "bonded" equipment. The bonded fabric uses high technology and new materials of "new synthetic fiber" and has many excellent properties (compared with ordinary synthetic fiber). For example, the fabric is fine, clean, delicate, elegant, warm, full in appearance, windproof, breathable, and has certain waterproof function. Its main characteristics are warmth retention and good air permeability.
Because the bonded fabric adopts superfine fibers, the fabric has very high cleaning capability, namely decontamination capability. The fabric is also characterized by good abrasion resistance, soft hand feeling, air permeability and moisture permeability of superfine fiber fabric, so it has obvious advantages in terms of tactile sensation and physiological comfort, and the crease resistance of superfine fiber fabric is poor... less
led by
xi xiximin
-
First of all, if you want to sleep well and have a good state of mind, you cannot do without a good fabric bedding. For example, the Sunshine Fabric(WARPKNITTEDFABRIC) https://www.warpknittedfabric.com/product/sunshine-fabric/ is made of high-quality... moreFirst of all, if you want to sleep well and have a good state of mind, you cannot do without a good fabric bedding. For example, the Sunshine Fabric(WARPKNITTEDFABRIC) https://www.warpknittedfabric.com/product/sunshine-fabric/ is made of high-quality fine wool cotton and is woven by a new environment-friendly sizing agent and PVA-free green sizing process, benefiting the community with the brand concept of ecological environment protection.
Scientific research has found that the human body has a system in which light and darkness control sleep hormone content-melatonin content. The function of melatonin is to let us sleep and restore energy during sleep. If your melatonin content is too high, you will feel sleepy and have insufficient energy. When people are in darkness, melatonin starts to secrete. Once the eyes are not exposed to sunlight, melatonin content starts to rise. Therefore, during the day we should be exposed to more sunlight to keep our minds awake for a long time. At the same time, we... less
led by
xiumin xiu
-
Apart from the size, resistance and resilience of Enameled Wire(XINYU-ENAMELEDWIRE) http://www.xinyu-enameledwire.com/ , other properties of enameled wire are all related to the paint film. Therefore, under the condition of proper and stable enameling... moreApart from the size, resistance and resilience of Enameled Wire(XINYU-ENAMELEDWIRE) http://www.xinyu-enameledwire.com/ , other properties of enameled wire are all related to the paint film. Therefore, under the condition of proper and stable enameling process, enameled wire enamel is the key factor affecting enameled wire performance. If the performance of enameled wire is to be stable, the quality of enameled wire paint must be stable and reliable with a certain technological margin.
In foreign countries, in order to better control the curing process of enamel and the quality of enameled wire and enameled wire, enameled wire consumers often request enameled wire manufacturers to provide relevant data such as infrared spectrum, gas chromatography and gel chromatography of enameled wire in order to confirm the stability of enameled wire paint components. When quality problems occur during enameled wire manufacturing, these data are also helpful for enameled wire manufacturers to analyze the problems,... less
led by
xiu weetime
-
1. The Water Dispenser With Filtration(KOKOELECTRIC) https://www.kokoelectric.com/product/water-dispenser-with-filtration/ may be leaking because of the water bottle leaking.
Solution: First wrap the water bottle with a towel. If the water level leaks,... more1. The Water Dispenser With Filtration(KOKOELECTRIC) https://www.kokoelectric.com/product/water-dispenser-with-filtration/ may be leaking because of the water bottle leaking.
Solution: First wrap the water bottle with a towel. If the water level leaks, the towel will be wet. At this moment, we can prove that the water dispenser leaks because it appears on the drinking bottle, or replace it with a new drinking bottle, and observe that the drinking chance will not leak again. After replacing the drinking bottle, the water dispenser will not leak again, which can also explain that the water dispenser leaks because the drinking bottle is broken. At this time, the drinking bottle should be replaced.
2. Sometimes we don't turn off the tap after receiving the water, which will also lead to the water dispenser with filtration.
Solution: Screwback the water outlet faucet of the drinking machine to ensure that the water outlet faucet does not leak any more.
3. The one-way valve of the water dispenser will... less
led by
ko koele
-
Failure caused by wear of the combine chains(GETECHAIN) https://www.getechain.com/ is the most common and obvious form of expression. There are many reasons for this failure. The main reasons are poor material quality of the combine chains and improper... moreFailure caused by wear of the combine chains(GETECHAIN) https://www.getechain.com/ is the most common and obvious form of expression. There are many reasons for this failure. The main reasons are poor material quality of the combine chains and improper operation of workers. The most easily worn parts of the combine chains are sprocket and pin shaft. The wear of these two parts is mainly due to insufficient local lubrication, so in order to avoid this phenomenon, operators should pay attention to check the lubrication effect frequently, add lubricating oil in time, check whether there is abrasive in the lubricating oil or change the lubrication method. After the sprocket is slightly worn, the sprocket can be reversely installed so that the lightly worn side faces the combine chains. In addition, if the use environment is harsh or the lubrication seal is not good, the hinge will be worn. Once the combine chains hinge is worn, the chain-link will become longer, which will easily cause tooth jump or chain... less
led by
minseok kim
-
The core focus of MyCareer in NBA 2k20, alongside the other modes linked to it, is to create the very best player in the NBA. Having a total of 189 archetype mixes to choose from, choosing the best construct can get pretty difficult. Below is a short... moreThe core focus of MyCareer in NBA 2k20, alongside the other modes linked to it, is to create the very best player in the NBA. Having a total of 189 archetype mixes to choose from, choosing the best construct can get pretty difficult. Below is a short guide that will assist you select the right construct for enjoying in MyCareer with Cheap NBA 2K MT Coins.
Selecting skill specializations which don't traditionally fit a certain position will restrict your personality's high rank badges and feature specializations. Basically, you will either end up overspecializing in certain stats while being extremely weak in others or simply have a well-rounded player with few swipes. In NBA 2k20, the position and amount of badges (Bronze, Silver, Gold, and Hall of Fame) are also something to consider when choosing your archetype as some builds have few to no Hall of Fame badges.
Choosing your own height, weight, and wingspan also affects your build. Overall, these will affect your character shot contests,... less
led by
yingjun li
-
The loading time to get to your mycourt is a travesty. The 'walking to a locker' etc. is a arrant time-waste activity in the annoy-you-into-buying-vc gamevplan 2K is performing.Also I abhorrence the way you are ashore with ONE abject 2k20 mt central... moreThe loading time to get to your mycourt is a travesty. The 'walking to a locker' etc. is a arrant time-waste activity in the annoy-you-into-buying-vc gamevplan 2K is performing.Also I abhorrence the way you are ashore with ONE abject 2k20 mt central actualization aloft all the MyPlayers you make.
And should you about-face around to say a brand new myplayer and about-face aback for your own capital myplayer your main's clothing, NBA 2K MT and added significantly, SHOES, get displace to the defaults. I got the accomplished 'Adidas is shameful you wore added shoes' argument from Bryan on my funds guy afterwards I switched to my new actualization for a little, because the funds man's shoes got switched aback to 2K generics.
Once slashers get traveling such as that there's annihilation you'll be able to do. If it was a true slasher of inexpensive 2K MT, I beforehand you had been amphitheatre him a bit to tight.You might be coinsowing off abundant more. You we're aswell a little how to get mt in nba 2k20... less
led by
yingjun li
-
Varnish Wire(XINYU-ENAMELEDWIRE) http://www.xinyu-enameledwire.com/product/enameled-rectangular-copperaluminum-wire/ is the main raw materials for motors, electrical appliances and household appliances. Especially in recent years, the electric power... moreVarnish Wire(XINYU-ENAMELEDWIRE) http://www.xinyu-enameledwire.com/product/enameled-rectangular-copperaluminum-wire/ is the main raw materials for motors, electrical appliances and household appliances. Especially in recent years, the electric power industry has achieved sustained and rapid growth. With the rapid development of household appliances, the application of varnish wire has brought about a wider range of fields, with higher requirements for varnish wire. So what is the manufacturing process of varnish wire?
First of all, in the production line, in the normal coating machine operation, most of the operators, energy and physical strength are on the production line, so that the operators have paid a lot of labor, and the line changing joints are prone to quality problems and operational errors. The effective method is a large capacity line. The key to this wire is to control the tension. When the tension is high, it is not only a thin wire, making the surface of the wire lose light, but also... less
led by
xiu weetime
