In this article, we will show you how to replace one of the Water Filter Spare Parts(KOKOELECTRIC) https://www.kokoelectric.com/
- the filter element and describe other maintenance to be performed at the same time.
To replace the filter element, use... moreIn this article, we will show you how to replace one of the Water Filter Spare Parts(KOKOELECTRIC) https://www.kokoelectric.com/
- the filter element and describe other maintenance to be performed at the same time.
To replace the filter element, use the canister wrench supplied with the system to unscrew the canister. When you are facing the front of the unit, turn the wrench to the left. After loosening it, you should be able to loosen it manually.
1. Remove the filter and discard. Rinse the canister.
2. Install a new filter element. Please note that the two canisters have different filter elements. The left-hand cylinder uses a 5-micron sediment filter. The right-hand cylinder uses a .5 micron carbon block filter. Be sure to install the new elements in the correct tank.
Screw the canister back onto the mounting head, then turn to the right and tighten with a can wrench. You only need moderate pressure.
3. When replacing the filter, check the rubber O-ring on the inside of the filter element.... less
After injection moulding a plastic part, the plastic part is ejected from the cavity, whether it is a single or multiple parts of the ejection mechanism, and the ejection work is generally done in one shot. However, sometimes due to the special shape of... moreAfter injection moulding a plastic part, the plastic part is ejected from the cavity, whether it is a single or multiple parts of the ejection mechanism, and the ejection work is generally done in one shot. However, sometimes due to the special shape of the plastic part or the automation required in production, the plastic part is still difficult to remove from the cavity or does not fall off automatically after the demolding work is completed. At this time, it is necessary to add another demolding action to peel off the plastic part. The difficulty of demolding is mainly due to the extrusion of gates or plastic parts in the Household Product Mould(FURNITUREMOULD) https://www.furnituremould.com/product/daily-necessities-mould/
. The reasons are:
1. Insufficient production.
2. Household product mould
(1) Demoulding structure or improper position.
(2) The draft is insufficient.
(3) Household products have high mould temperature or poor ventilation.
(4) The rough surface of the runner wall or... less
You probably already have a garden hose. Chances are, it's cumbersome, tangles easily and is a pain to roll back up. But, folks, there's a better option: It's easy to handle, it never kinks, and it's a true game changer for gardeners and and outdoor... moreYou probably already have a garden hose. Chances are, it's cumbersome, tangles easily and is a pain to roll back up. But, folks, there's a better option: It's easy to handle, it never kinks, and it's a true game changer for gardeners and and outdoor enthusiasts everywhere.
Abundant agriculture has a strong foundation, rich farmers have a prosperous country, and stable rural areas have a stable society. With the continuous development and progress of the society, the development strategies of industry supporting agriculture... moreAbundant agriculture has a strong foundation, rich farmers have a prosperous country, and stable rural areas have a stable society. With the continuous development and progress of the society, the development strategies of industry supporting agriculture and city supporting rural areas have been gradually implemented. The construction of new rural areas has been raised to a new height. More and more new rural villas have sprung up in China.
Ro Spare Parts(KOKOELECTRIC) https://www.kokoelectric.com/product/ro-system-component/
remove up to 99% of dissolved salts (ions), granules, colloids, organics, bacteria and pyrogens from the influent (although they should not rely on reverse osmosis... moreRo Spare Parts(KOKOELECTRIC) https://www.kokoelectric.com/product/ro-system-component/
remove up to 99% of dissolved salts (ions), granules, colloids, organics, bacteria and pyrogens from the influent (although they should not rely on reverse osmosis systems to remove 100% of bacteria and viruses). The RO membrane excludes contaminants based on their size and charge. Any contaminant with a molecular weight greater than 200 may be rejected by a properly functioning RO system (for comparison, the molecular weight of the water molecule is 18). Similarly, the greater the ionic charge of a contaminant, the less likely it is to pass through the RO membrane. For example, sodium ions have only one charge (monovalent) and are not repelled by the RO membrane and, for example, calcium with two charges. Again, this is why the RO system does not remove gases such as CO2 well because they are not highly ionized (charged) in solution and have a very low molecular weight. Since the RO system does not remove gases,... less
Wear failure refers to blade passivation, rounded corners, flat depressions, surface grooves and mucosal peeling (the blank metal sticks to the working surface of the Air Cooler Mould(FURNITUREMOULD) https://www.furnituremould.com/
during the rubbing... moreWear failure refers to blade passivation, rounded corners, flat depressions, surface grooves and mucosal peeling (the blank metal sticks to the working surface of the Air Cooler Mould(FURNITUREMOULD) https://www.furnituremould.com/
during the rubbing process). In addition, during the operation of the punch, the lubricant is converted into a high-pressure gas after combustion, and the surface of the punch is washed vigorously to form a cavitation phenomenon.
In the case of cold stamping, if the load is not large, the type of wear is mainly oxidation, and the wear may also be a certain degree of bite wear. When the edge portion becomes dull or the punching load is large, the occlusal wear becomes severe, the wear is accelerated, and the wear resistance of the die steel depends not only on its hardness but also on the nature, size, distribution and amount of the carbide. Indie steel, high-speed steel and high-chromium steel have high wear resistance. However, in the case of severe carbide segregation... less
1. If the Air Cooler Mould(FURNITUREMOULD) https://www.furnituremould.com/
is poorly processed, if there are defects such as scratches, micropores, abrasion, roughness, etc., it will inevitably be reflected on the plastic parts, and the gloss of the... more1. If the Air Cooler Mould(FURNITUREMOULD) https://www.furnituremould.com/
is poorly processed, if there are defects such as scratches, micropores, abrasion, roughness, etc., it will inevitably be reflected on the plastic parts, and the gloss of the plastic parts is poor. In this case, the mould should be carefully machined to make the cavity surface rougher and chrome-polished if necessary.
2. If the surface of the cavity is oily or watery, or if there are too many release agents, the surface of the plastic part will become darker and darker. To do this, remove grease and water stains in a timely manner and use a limited amount of release agent.
3. If the plastic parts are too small, the demoulding is difficult, or the force is too large when demolding so that the surface gloss of the plastic parts is good. In this case, the draft angle should be increased.
4. If the air cooler mould is depleted, excessive gas will be left in the mould, which will also cause a decrease in gloss. To do this, check... less
In the past few years, most of Garden tool's products were sold to flower and wood markets or exported. However, in recent years, they have openly entered the common people's families. Its style and color also changed from the monotony of the past,... moreIn the past few years, most of Garden tool's products were sold to flower and wood markets or exported. However, in recent years, they have openly entered the common people's families. Its style and color also changed from the monotony of the past, adding unique and colorful products. In the market of China's Science and Technology Hardware City, Garden tool covers everything, including water spray guns, garden shears, pruning shears, lawn mowers, and so on. Its products are full of variety and everything. less
YouTube एक बहुत बड़ा Platform है। अपने Opinion और Knowledge को Share करके अपनी पहचान बनाने का! और इतना भी आसान नही है YouTube पर Popular... moreYouTube एक बहुत बड़ा Platform है। अपने Opinion और Knowledge को Share करके अपनी पहचान बनाने का! और इतना भी आसान नही है YouTube पर Popular होना!
लेकिन YouTuber के रूप में अपनी पहचान बनाना नामुमकिन तो नही है! पर कठिन ज़रूर है!
आज की Trend की बात करें तो, लगभग हर व्यक्ति को Technology और Internet के बारे में कुछ न कुछ तो पता ही है! और इनसे ताल्लुक रखने वाले लोगों के दिल में आज Blogger और YouTuber बनने का खुमार चढ़ा है!
हम अपने YouTube Channel को आगे बढ़ाने के लिए क्या नही करते हैं!... less
