1. If the Air Cooler Mould(FURNITUREMOULD) https://www.furnituremould.com/
is poorly processed, if there are defects such as scratches, micropores, abrasion, roughness, etc., it will inevitably be reflected on the plastic parts, and the gloss of the... more1. If the Air Cooler Mould(FURNITUREMOULD) https://www.furnituremould.com/
is poorly processed, if there are defects such as scratches, micropores, abrasion, roughness, etc., it will inevitably be reflected on the plastic parts, and the gloss of the plastic parts is poor. In this case, the mould should be carefully machined to make the cavity surface rougher and chrome-polished if necessary.
2. If the surface of the cavity is oily or watery, or if there are too many release agents, the surface of the plastic part will become darker and darker. To do this, remove grease and water stains in a timely manner and use a limited amount of release agent.
3. If the plastic parts are too small, the demoulding is difficult, or the force is too large when demolding so that the surface gloss of the plastic parts is good. In this case, the draft angle should be increased.
4. If the air cooler mould is depleted, excessive gas will be left in the mould, which will also cause a decrease in gloss. To do this, check... less
In the past few years, most of Garden tool's products were sold to flower and wood markets or exported. However, in recent years, they have openly entered the common people's families. Its style and color also changed from the monotony of the past,... moreIn the past few years, most of Garden tool's products were sold to flower and wood markets or exported. However, in recent years, they have openly entered the common people's families. Its style and color also changed from the monotony of the past, adding unique and colorful products. In the market of China's Science and Technology Hardware City, Garden tool covers everything, including water spray guns, garden shears, pruning shears, lawn mowers, and so on. Its products are full of variety and everything. less
YouTube एक बहुत बड़ा Platform है। अपने Opinion और Knowledge को Share करके अपनी पहचान बनाने का! और इतना भी आसान नही है YouTube पर Popular... moreYouTube एक बहुत बड़ा Platform है। अपने Opinion और Knowledge को Share करके अपनी पहचान बनाने का! और इतना भी आसान नही है YouTube पर Popular होना!
लेकिन YouTuber के रूप में अपनी पहचान बनाना नामुमकिन तो नही है! पर कठिन ज़रूर है!
आज की Trend की बात करें तो, लगभग हर व्यक्ति को Technology और Internet के बारे में कुछ न कुछ तो पता ही है! और इनसे ताल्लुक रखने वाले लोगों के दिल में आज Blogger और YouTuber बनने का खुमार चढ़ा है!
हम अपने YouTube Channel को आगे बढ़ाने के लिए क्या नही करते हैं!... less
Perhaps in the minds of many people, inside light steel villa house is flashy, not safe, not strong enough, not as long as brick-concrete structure, and its cost is very expensive, but it is a luxury product among developed countries in Europe and the... morePerhaps in the minds of many people, inside light steel villa house is flashy, not safe, not strong enough, not as long as brick-concrete structure, and its cost is very expensive, but it is a luxury product among developed countries in Europe and the United States. In fact, it is not suitable for China! So are these rumors true or not? Today, I'd like to talk to you about specific information about light steel frame to eliminate these misunderstandings!
The operating temperature of the Air Cooler Mould(FURNITUREMOULD) https://www.furnituremould.com/
will depend on a number of aspects, including the type and grade of material to be moulded; the duration of the flow, the profiled wall portion, and it is... moreThe operating temperature of the Air Cooler Mould(FURNITUREMOULD) https://www.furnituremould.com/
will depend on a number of aspects, including the type and grade of material to be moulded; the duration of the flow, the profiled wall portion, and it is generally found to be advantageous to use a temperature slightly higher than only filling the cavity, as this tends The surface finish of the moulded article is enhanced by reducing weld lines, flow marks and other flaws. To maintain the desired thermal differential between the mould and the plastic material, water (or an alternative fluid) is distributed through the holes or channels in the mould. These holes or channels are called runners or waterways, and the total method of the runners is called a circuit.
One of the basic principles of injection moulding is that the hot material enters the air cooler mould where it cools rapidly to a temperature at which it hardens sufficiently to maintain the contour of the stamp. For this reason, the temperature... less
Nature is wonderful for all living things. it diversity and beauty says The Edan created in our Earth.we can keep it
there each and every lives ,tree animals and all movable creatures and immovable things in our Earth. Friends I expect your support... moreNature is wonderful for all living things. it diversity and beauty says The Edan created in our Earth.we can keep it
there each and every lives ,tree animals and all movable creatures and immovable things in our Earth. Friends I expect your support .all are welcome.
VS George [email protected].
from India,Kerala.
In previous years, high quality garden tools were mostly sold to flower and wood farms or exported. However, in recent years, they have openly entered the common people's families. Its style and color also changed from the monotony of the past, adding... moreIn previous years, high quality garden tools were mostly sold to flower and wood farms or exported. However, in recent years, they have openly entered the common people's families. Its style and color also changed from the monotony of the past, adding unique and colorful products. In the market of China's Science and Technology Hardware City, Garden tool covers everything, including water spray guns, garden shears, pruning shears, lawn mowers, and so on. Its products are full of variety and everything.
During the filling phase of the entire Air Cooler Mould(FURNITUREMOULD) https://www.furnituremould.com/
, the hottest material will be located near the entry point (ie, the gate) and the coldest material may be located at the point furthest from the... moreDuring the filling phase of the entire Air Cooler Mould(FURNITUREMOULD) https://www.furnituremould.com/
, the hottest material will be located near the entry point (ie, the gate) and the coldest material may be located at the point furthest from the inlet. However, the heat of the coolant fluid rises as it passes through the mould. Subsequently, in order to achieve an equilibrium cooling rate on the moulding surface, it is necessary to position the incoming coolant fluid near the "hot" moulding surface and identify the passage containing the "heated" coolant fluid adjacent to the "cold" moulding surface. . Even so, it can be seen from the subsequent dialogue that the use of idealized techniques is often impractical and the designer must use a considerable amount of common sense when planning the coolant circuit while avoiding unnecessary expensive moulds.
Units for circulation of water (or other fluids) are commercially achievable. The device is fully connected to the mould by a flexible hose, and... less
