Recent Entries

• Features Of Universal Joint Cross

  by xsj bearing July 12, 2021
  During the transmission process of our common universal joint cross , the rotational speeds of the driving and driven shafts are not equal. The so-called "non-uniform speed of transmission" refers to the uneven angular velocity during the rotation of the driven shaft. The advantages are safety...

• Classification Of Custom Universal Joints

  by xsj bearing June 28, 2021
  The universal joint we are talking about is a mechanical structure that uses ball-shaped connections to realize the power transmission of different shafts. It is a very important part of the car. However, there are many types of universal joints, so for those who don't know much about it, custom uni...

• About The Front Device Of Universal Joint For Truck

  by xsj bearing June 21, 2021
  The universal joint transmission device is generally composed of a universal joint for truck and a drive shaft, and intermediate support is sometimes required. On the front-engine rear-wheel drive vehicle, the universal joint transmission is installed between the transmission output shaft and ...

• Classification Of Custom Universal Joints

  by xsj bearing May 24, 2021
  There are many types of universal joints, so it will be relatively difficult when we choose, especially when we are new to this industry, we can't tell what is clear. So it is difficult for us to know what universal joints when we need them. At this time, we can choose custom universal joints t...

• Understand The Cross Shaft Type Of Custom Universal Joints

  by xsj bearing May 10, 2021
  We all know that universal joints are a very important part of a car, and there are many types of universal joints, so many people do not know how to choose universal joints at the beginning and choose custom universal joints . There is also a cross-shaft rigid universal joint in the universal ...

• Introduce The Principle Of Maintenance-free Bearings

  by xsj bearing April 26, 2021
  It can be seen literally that maintenance-free bearings do not require maintenance, or require very little maintenance. Maintenance-free is generally for self-lubricating bearings, you do not need to add oil, you do not need to maintain it during the service cycle. Maintenance-free bearings re...

• Learn The Pre-install Location Of The 5-7126X 6H2577 Universal

  by xsj bearing April 19, 2021
  The universal joint is a very important part of the car, the combination of universal joint and driveshaft, known as the universal joint transmission device. However, there are many types of universal joints, one of which is the 5-7126X 6H2577 universal joint . In the front-engine rear-wheel d...

• Understand The Principle Of 5-7126X 6H2577 Universal Joint

  by xsj bearing March 29, 2021
  Have you heard of the universal joint? The so-called universal joint refers to the mechanical structure that uses the ball-shaped connection to realize the power transmission of different shafts, and it is a very important part of the automobile. But there are many kinds of universal joints, one of ...

• Installation Position Of 5-7126X 6H2577 Universal Joint

  by xsj bearing March 15, 2021
  For universal joints, our most commonly used instant unequal-speed cross-shaft universal joints have a simple structure, reliable transmission, and high efficiency, allowing a large angle between the two transmission shafts. But, in addition to these major categories, there are also sub-categories s...

• Installation Position Of 5-7126X 6H2577 Universal Joint

  by xsj bearing March 15, 2021
  For universal joints, our most commonly used instant unequal-speed cross-shaft universal joints have a simple structure, reliable transmission, and high efficiency, allowing a large angle between the two transmission shafts. But, in addition to these major categories, there are also sub-categories s...

• Features Of Precision Universal Joint

  by xsj bearing March 8, 2021
  As a key "part" of the universal transmission of the automobile drive system, the precision universal joint can be said to have a great effect. Today we will talk about the characteristics of the precision universal joint . The precision universal joint is used in transmission applications whe...

• Causes Of Failure Of The Universal Joint Cross

  by xsj bearing January 25, 2021
  The universal joint cross is an unequal velocity universal joint composed of a cross shaft connecting two universal joint forks. When we use the universal joint, we will encounter various troubles and failures in the south. Today we will talk about the failure and the reason for the universal j...

• Installation Position Of 5-7126x 6h2577 Universal Joint

  by xsj bearing January 11, 2021
  In fact, in our daily life, we rarely see universal joints, but in the car drive system, we can see the two universal joints, so the most commonly used universal joint is in the car. Our economy is developing rapidly, and people's lives are getting better and better. In addition, almost every househ...

• What Is 3102-2201025 Russian Universal Joint Cross

  by xsj bearing January 4, 2021
  Civilization, especially ideology and culture, is the soul of a country and a nation. No matter which country or nation, if you don't cherish its own ideology and culture and lose the soul of ideology and culture, this country and nation cannot stand up. The country and its own nation must cherish a...

• The characteristics of universal joint coupling

  by xsj bearing September 7, 2020
  The drum gear 57x152mm universal joint for TRUCK GU7630 3874100031 1651229 coupling belongs to the rigid-flexible universal joint coupling. It has the ability to compensate the axis deviation in the radial, axial and angular directions. Compared with the CL type spur universal joint coupling , ...

• The cause of the universal joint not turning

  by xsj bearing August 31, 2020
  The universal joint is also commonly known as 3102-2201025 Russian universal joint cross. For example, the most commonly used rotary tiller is the power output shaft of the tractor that transmits the power to the rotary tiller through the cross universal joint. The universal joint does not rotate. ...
  comments

• Two special cases of cross shaft universal joint

  by xsj bearing August 24, 2020
  universal joint cross is a type of unequal velocity universal joint, that is, when the angle between the two shafts connected by the universal joint is greater than zero, the output shaft and the book input shaft transmit motion at a varying instantaneous angular velocity ratio, but the average...

• What does the use of Wanxiang energy saving bring

  by xsj bearing August 18, 2020
  What are the advantages of a universal joint manufacturer, and what is its structure? The cross universal joint can make the two shafts that are not on the same axis, the axis bend angle is large, and the axial movement is large, and the two shafts can rotate continuously at equal angular speed. ...

• The future development prospects of bearings

  by xsj bearing August 5, 2020
  Maintenance-Free bearings are key mechanical parts in the manufacturing industry chain. They can not only reduce friction, but also support loads, transmit power and maintain positioning, thereby promoting the efficient operation of equipment. The bearing industry can be considered as a traditi...

• Definition of bearing

  by xsj bearing July 22, 2020
  The bearing is a mechanical component whose function is to guide the rotating assembly. U-Joint With 2 Welder Plate Type And 2 Plain Round Bearings can rotate one component relative to another. The bearing is a high-precision component that can be effectively transported and loaded to enable th...

• Types of universal joints

  by xsj bearing July 20, 2020
  The 5-280X PRECISION 334 universal joint has obvious elasticity in the torsional direction. The flexible universal joint is mainly composed of rubber elastic elements, bushings, bolts and centering devices provided to ensure dynamic balance at high speed. The working principle is that when the ...

• What should be paid attention to when installing and using univ

  by xsj bearing July 16, 2020
  First of all, when disassembling, transporting, and storing U-Joint With Slotted Bearings, care should be taken to avoid collision and stacking. When the vehicle is started, try to avoid using the vehicle's inertia to start the engine, which will impact the universal joint bearings. Secondly, when ...